产品介绍
当前位置: 产品详情页面 首页 > 产品详情页面

High pressure polyurethane spray/injection equipment

  • High pressure polyurethane spray/injection equipment
    JHPK-F2008A
  • High pressure polyurethane spray/injection equipment
    JHPK-F2008A
  • High pressure polyurethane spray/injection equipment
    JHPK-F2008A
  • High pressure polyurethane spray/injection equipment
    JHPK-F2008A
  • High pressure polyurethane spray/injection equipment
    JHPK-F2008A
Production

Our company has obtained Quality Management System Certificates, such as UKAS and ISO9000. The advanced management system and high efficient and modern production mode provide reliable quality assurance for our products.

Beijing Jinghua Park Polyurethane Equipment Co., Ltd freshly launched JHPK-F2008A polyurethane spray and perfusion equipment, which has more advanced configuration, higher heating power, lighter weight and better mobility than other types.

Various types of double-component spray guns provide more selections for you. You can realize the transformation between spraying and perfusion only by changing the gunpoint, dispensing with changing other parts of the equipment. It makes the operation very easy.

The respective 3000w heaters foe the double-component materials reduce the viscosity of the material more effectively to assure the optimal blending effectiveness.

The automatic reposition devices postpone the use time of materials sealing parts by reposting the transfer pump down to the stop point at the end of each working day.

The changeable power heating temperature control prevents overheating effectively. The safety steps for whole process temperature control, overheating control and emergency stop make the operation easy and safe.

The new JHPK-F2008A system can be widely used in different kinds of areas such as refrigerator warehouse heat preservation, building external wall, roof water-proof and heat preservation, gymnasium, motorcar and ship, air conditioner adiabatic, and solar water heater and so on.

Standard

Main equipment: 1 set

Spray gun: 1 piece

Heating pipe: 15m(50ft)

1.5m pipe connecting to the gun: 1 set

Feeding pump: 2 sets

Spare parts: 1 set

Tool: 1 set

English manual: 1 set

Package: plywood tray

Technical

Ratio of raw materials: 1:1

Viscosity range: 200~1000CPS

At operating pressure material output: 4~8kg/min

Heating device power for material: 3000w x2(or 4500w x2optional)

Heating power for pipe heating preservation: 3500w

Single material output pressure:5~10Mpa(725~1450psi)

The highest heating temperature: 80℃ (176°F)

Air source requirements: 0.9m3/min 0.7Mpa(33cfm,100psi)

Electrical requirements: 3-phase, 4-line 380V, 50/60Hz,

Max. Pipe length: 90m(300Ft)

Shipping Data

Dimension: 800x900x1550(mm)

Weight: 125kg

Corollary Equipment
polyurethane spray&injection gun
Time:01-06
Time:01-12
Transfer Pump/Feeding Pump
Time:01-05
Similar Equipment
Process/case